Ranger RCI-2995DX Base Amateur Radio

SKU
RCI-2995DX
Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large, easy-to-use controls. The RCI-2995DX has features that include: AM-CW-FM-SSB modes of operation, variable power, noise blanker and built-in heavy duty AC power supply and provides 150 watts PEP output, and a rear panel frequency meter output for measuring transmit operating frequency. Dual panel meters display received signal strength transmitter power output and antenna SWR. Clarifier audio tone controls for accurate receiver tuning improved reception under difficult conditions. Pushbutton selection of programming scanning functions, and programmable repeater split for FM operation enhances the renewed 10 meter repeater activity. The RCI-2995DX offers microprocessor-based advanced features typically found in high-end units costing several times as much, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The unit offers three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, scanning of selected frequency segment or stored frequenciesand front panel frequency selector lockout .
Notice: 10 Meter Radios are intended for use by amateur radio operators only.  A license from the FCC is required.
10 Meter Radios come with a warranty from their respective manufacturer.  Returns are not accepted by A-1 Telecom, but should be handled by their respective warranty center.

RCI-2995DX Specifications

 General

RCI-2995DX 

 Frequency Range

10 Mtr: 28.000 - 29.6999 MHz 
12 Mtr: 24.8900 - 24.9900 MHz

 Tuning Steps

1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz

 Emission

USB, LSB, CW, AM, FM

 Clarifier Range

±5 KHz

 Frequency Tolerance

0.005%

 Frequency Stability

0.001%

 Operating Temperature Range

- 20 ºC to + 50 ºC

 Meters

 Left: RX Signal Strength
Right: RF Output, Antenna SWR

 Antenna Impedance

50 W

 Input Voltage

110 VAC, 60 Hz
( 220 VAC, 50 Hz Optional )

 AC Power Consumptions

300 Watts

 Microphone

400 W Dynamic PTT - 6 Pin

 Size (W x D x H)

19" x 12" x 6-1/4"

 Weight

32 lb 6 oz

 Shipping Weight

38 lb.

   

 Transmitter

 

 RF Power Output

50 Watts RMS: CW / AM / FM 
150 Watts (PEP): SSB

 Modes

USB, LSB, CW, AM, FM

 Carrier Suppression

Better Than 60 dB

 Spurious Emission

More Than 60 dB

 Antenna Connector

Standard SO-239 Type

 Output Impedance

Unbalanced 50 W

   

 Receiver

 

 Sensitivity

AM / CW: 0.7 µV for 10 db SINAD
FM: 0.5 µV for 12 db SINAD
SSB: 0.2 µV for 10 db SINAD

 AM / FM Selectivity

50 db at 10 KHz

 SSB Selectivity

5 db at 2 KHz, 60 db at 4 KHz

 Image Rejection

More than 50 db

 IF Rejection

More than 80 db at 455 KHz

 Audio Output Power

2.5 Watts @ 10% THD

 Intermod Rejection

> 50 db

 Noise Blanker

IF Single Gate Type

 Built In Speaker

8 W

 External Speaker

Disables Internal Speaker When Connected, 8 W

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account