Firestik RMB-1 Replacement Microphone Hang Button

SKU: RMB-1

Quick Overview

Nowadays, most microphones have a fragile plastic hanger button on the back. Breakage is very common. Now you have a source to get a quality replacement. Our microphone button is made of lightweight aluminum and is finished with a black anodize coating. We also supply a screw, nut and washer for mounting. Inorder to make the part as universal as possible, you might find that we left the screw a little long for some installations. Nonetheless, it can be cut flush with the nut face after the installation is completed. This part is sized to fit with any of the common stamped hanger plates.

Firestik RMB-1 Replacement Microphone Hang Button

Double click on above image to view full picture

Zoom Out
Zoom In

Details

Nowadays, most microphones have a fragile plastic hanger button on the back. Breakage is very common. Now you have a source to get a quality replacement. Our microphone button is made of lightweight aluminum and is finished with a black anodize coating. We also supply a screw, nut and washer for mounting. Inorder to make the part as universal as possible, you might find that we left the screw a little long for some installations. Nonetheless, it can be cut flush with the nut face after the installation is completed. This part is sized to fit with any of the common stamped hanger plates.

Additional Information

UPC N/A
Weight 0.1000
Manufacturer Firestik Antenna
Country of Origin N/A
Schematic N/A
Retail Price N/A
Case Quantity N/A

A-1 Telecom is a wholesale only distributor. If you would like to purchase a part listed on our website, feel free to contact us at (800)238-1786 or by email at sales@a1telecom.com and we will direct you to one of our many dealers close to your location.